The EPEVER Tracer AN Collection Photo voltaic Charge Controller is actually a hugely productive photo voltaic controller made for off-grid photo voltaic techniques. Depending on multiphase synchronous rectification engineering, it makes sure optimized Vitality conversion and system security for a wide range of photovoltaic (PV) apps.
Vital Characteristics of the EPEVER Tracer AN Sequence Controller
The Tracer AN sequence makes use of EPEVER Solar Cost Controller technologies for remarkable photo voltaic Vitality harvesting. Vital functions involve:
Multiphase Synchronous Rectification (MSR) for enhanced Power conversion.
State-of-the-art MPPT Algorithm with >ninety nine% efficiency.
Dual-Stage Charging for Improved battery everyday living.
LCD Display screen with authentic-time info checking.
Several Load Control Modes which includes guide and timer.
Detailed Digital Protections against overcharging, above-discharging, small circuits, and reverse polarity.
Step-by-Stage Guidebook to Organising the EPEVER Tracer AN Collection Controller
one. Unboxing and Making ready the Controller
Make sure all components are involved: Tracer AN device, temperature sensor, interaction cables, and person manual.
Verify the model quantity and voltage ratings match your photo voltaic panel and battery technical specs.
two. Mounting the Demand Controller
Find a nicely-ventilated, dry spot close to the battery bank.
Safe the Tracer AN controller using the supplied mounting brackets.
Sustain appropriate clearance for heat dissipation.
3. Wiring the Photo voltaic Demand Controller
Warning: Constantly comply with suitable security protocols and ensure the system is powered off prior to connecting factors.
Action 1: Connect the battery terminals to the demand controller (favourable to beneficial, adverse to adverse).
Phase 2: Connect the solar panel array to your PV input terminals.
Step three: Hook up the load terminals if utilizing a direct load relationship.
Action four: Double-Look at all connections for polarity and tightness.
four. Configuring the Controller Settings
Electrical power within the controller by connecting the battery very first.
Utilize the LCD display to navigate the configurations menu.
Configure:
Battery Variety: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Management Modes: Manual, timer, gentle Manage.
five. Monitoring and Information Logging
The Tracer AN Collection supports serious-time monitoring using the MT50 distant meter.
Info could be logged via the RS485 interaction port employing application like Photo voltaic Station Personal computer.
Distant monitoring is possible Together with the EPEVER WiFi module.
6. Troubleshooting Prevalent Troubles
Problem one: No Electrical power Output
Verify battery voltage and connections.
Confirm PV panel voltage exceeds battery voltage.
Problem 2: More than-Voltage Security
Verify the solar array’s voltage rating.
Change method parameters if vital.
Concern three: No Battery Charging
Inspect PV wiring for continuity.
Verify MPPT configurations within the menu.
Great things about the Tracer AN Series with MSR Technological know-how
The multiphase synchronous rectification engineering makes sure:
Larger Performance: Decreased Strength losses in the course of conversion.
Increased Reliability: Steady general performance below variable hundreds.
Lengthier Battery Lifetime: Consistent and precise charging profiles.
Summary
The EPEVER Solar Cost Controller with multiphase visit here synchronous rectification technology is undoubtedly an exceptional choice for optimizing solar energy generation and lengthening battery lifetime. By following the above set up guideline, customers can assure most efficiency and technique longevity.